HP XP7 Site Preparation Guide (H6F56-96012)

Five rack configuration
This following figure and table shows the service clearances and floor load rating for a five-rack
configuration.
Figure 8 Service clearances for a five rack system
*1 Clearance (a+b) is based on the floor load rating and the clearance (c). Floor load rating and
required clearances are shown in Table 15 (page 30).
*2 Clearance (d) is required over 300mm to open the front door. In the case that the clearance
(d) is less tan the clearance (a), give priority to clearance (a).
Service clearance, floor cutout, and floor load rating 29