Hitachi Dynamic Link Manager Software Users Guide for Solaris

¢
If no change is made to the HDLM-managed devices when the
dlmcfgmgr utility is executed, the utility outputs the message and
terminates.
¢
You cannot concurrently execute more than one dlmcfgmgr utility on
the same host. If you attempt such execution, the utility outputs the
message and terminates.
¢
When any of the operations below are performed in a Solaris 10 or
Solaris 11 environment, a message in the format below is output from
the devfsadmd daemon to syslog or the console. Ignore that message.
• Add an LU dynamically
• Delete an LU dynamically
• Add a path dynamically
devfsadmd[124]: [ID 937045 daemon.error] failed to lookup
dev name for /pseudo/dlmndrv@1/dlmfdrv@w50060e800436e211,1
The dlminstcomp HDLM Component Installation Utility
This utility complements HDLM installation. Execute this utility when both of
the following conditions are satisfied:
• Linkage with Global Link Manager is used
•
When HDLM is installed, the KAPL09241-W message is output
#
#
Execute this utility after installing the JDK.
For details about the JDK version to be installed, see JDK required for
linking with other Hitachi Command Suite products in
Hosts and OSs
Supported by HDLM on page 3-3.
Format
/opt/DynamicLinkManager/bin/dlminstcomp [-h]
Parameter
-h
Displays the format of the dlminstcomp utility.
The dlmlisthdev Utility for Assisting HDLM Transitions
Use the dlmlisthdev utility when migrating to a newer version of HDLM from
HDLM 04-00 or 04-01 installed in a Solaris 8 or Solaris 9 environment. The
utility creates a correspondence table between the logical device file names of
the HDLM devices used in version 04-00 or 04-01 and those of the HDLM
devices created.
7-20
Utility Reference
Hitachi Dynamic Link Manager (for Solaris) User Guide