Hitachi Dynamic Link Manager Software Users Guide for Windows

Message ID Message Text Explanation
KAPL04036-I The path health check for the
path aa...aa was executed.
Number of error paths = bb...bb
Details
aa...aa: Number of paths targeted
for path health checking.
bb...bb: Number of paths
determined to have an error by
path health checking.
Action
None.
KAPL04037-I The path health check
completed normally. Path ID =
aa...aa
Details
All the paths that path health
checking examined are fine.
aa...aa: Path ID for the path
examined by path health
checking.
Action
None.
KAPL04042-I HDLM SNMP TRAP information -
aa...aa
Details
All the paths that path health
checking examined are fine.
aa...aa: Start or stop.
Action
None.
KAPL04045-I HDLM SNMP TRAP was sent.
Trap ID = aa...aa, IP Address =
bb...bb, Port Number= cc...cc,
Community = dd...dd, Trap
Data = ee..ee
Details
aa...aa: Trap ID
bb...bb: Destination IP address of
the trap
cc...cc: Destination port number
of the trap
dd...dd: Community name given
to the trap
ee...ee: Transmission data
Action
None.
KAPL04053-W The option definition file was
recovered from a work file.
Action
Execute the dlnkmgr view -sys
command to check whether the
settings are recovered. If the
settings are not recovered,
execute the dlnkmgr set
operation to recover the settings.
For details on the view operation,
see
view (Displays Information)
on page 6-33. For details on the
set operation, see set (Sets Up
the Operating Environment) on
page 6-16.
Messages
8-53
Hitachi Dynamic Link Manager (for Windows®) User Guide