Hitachi Global Link Manager Software Installation and Configuration Guide

• If you have changed the IP address of the management server before
changing the settings files of Hitachi Command Suite products, write
down the new IP address.
• Do not change the settings in the cluster configuration file (the
cluster.conf file).
If other Hitachi Command Suite products have already been installed on the
same machine, the services of these products are also started or stopped at
the same time when you start or stop Hitachi Command Suite Common
Component.
To change the IP address of the management server:
1. Execute the following command to stop Hitachi Command Suite Common
Component:
Hitachi-Command-Suite-Common-Component-installation-folder\bin
\hcmds64srv /stop
2. Edit the user_httpsd.conf file.
If the old IP address is specified in the user_httpsd.conf file, change the
IP address to the host name or the new IP address. We recommend that
you specify the host name in the user_httpsd.conf file.
The user_httpsd.conf file is stored in the following locations:
Hitachi-Command-Suite-Common-Component-installation-folder\uCPSB
\httpsd\conf\user_httpsd.conf
3. Change the IP address of the management server, and then restart the
computer.
If the IP address of the management server has already been changed
before you change the Hitachi Command Suite Common Component
settings files, just restart the computer.
4. Execute the following command to make sure that Hitachi Command
Suite Common Component is running:
Hitachi-Command-Suite-Common-Component-installation-folder\bin
\hcmds64srv /status
5. If the IP address is used in the URLs for accessing Global Link Manager,
change the setting.
For details on how to change the URLs, see
Changing the Global Link
Manager Login URL on page 3-50.
Note that, if you change the IP address of the management server, you need
to check and, if necessary, revise the settings for each Hitachi Command
Suite product. For details about the settings that need to be changed, see
Settings Required After Changing the IP Address or Host Name of the Global
Link Manager Server on page 3-45.
Changing the Global Link Manager Server Host Name
This section describes how to change the host name of the management
server on which Global Link Manager is installed.
Note:
Setting Up Global Link Manager
3-43
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)