Hitachi Global Link Manager Software Installation and Configuration Guide

Table 3-12 Port Numbers Required for Communications between a
Management Server and Management Client
Port
Number
Source of
Communication
Destination of
Communication
Remarks
22015/tcp
#
Management client Management server This setting is required for
non-SSL communications.
22016/tcp
#
Management client Management server This setting is required for
SSL communications.
#: The port number is changeable. For details on port numbers used for
communications between a Management Server and Management Client, see
Changing Port Numbers for Accessing the HBase 64 Storage Mgmt Web
Service on page 3-47.
Table 3-13 Port Numbers Required for Communications between a
Management Server and Management Host
Port
Number
Source of
Communication
Destination of
Communication
Remarks
24041/tcp
#
Management server Management host This setting is required if the
HDLM version on the
management host is 5.8 or
later, or if you are using
DMP or HP-UX multipathing.
24042/tcp
#
Management server Management host This setting is required if the
HDLM version on the
management host is 5.8 or
later, or if you are using
DMP or HP-UX multipathing.
23011/tcp
#
Management server Management host This setting is required if the
HDLM version on the
management host is earlier
than 5.8.
23013/tcp
#
Management server Management host This setting is required if the
HDLM version on the
management host is earlier
than 5.8.
162/udp
#
Management host Management server This setting is required if the
management host receives
SNMP traps.
# The port number is changeable. For details on the port number required for
communications between a management server and management host, see
Changing the Settings of Hitachi Command Suite Common Agent Component
on page A-5 if the HDLM version on the management host is 5.8 or later,
or if you are using DMP or HP-UX multipathing. If the HDLM version of the
management host is earlier than 5.8, see the Hitachi Command Suite
Configuration Reference Guide. For details on the port number required for
receiving SNMP traps, see the part that describes the
Setting Up Global Link Manager
3-53
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)