Hitachi Global Link Manager Software Installation and Configuration Guide
Contents of property files:
The following tables list the properties that are used for changing the settings
of Hitachi Command Suite Common Agent Component.
Table A-1 Properties for Changing the Settings of Hitachi Command Suite
Common Agent Component (server.properties)
No. Property Name Description
Settings for the ports used by the service (or daemon process) and the Web server
function
1
server.agent.port
#
Specifies the port number for Hitachi
Command Suite Common Agent
Component's service (or daemon process).
When you add a host as a Global Link
Manager management-target in the Global
Link Manager GUI, specify the Agent
Service Port to this port number.
Default: 24041
2
server.http.port
#
Specifies the port number that Hitachi
Command Suite Common Agent
Component's WebServer uses.
Default: 24042
3
server.http.localPort
#
Specifies the port number for
communication between Hitachi Command
Suite Common Agent Component's service
(or daemon process) and the WebServer
process.
Default: 24043
Settings for the host name, IP address, and network interface cards that are used by the
Web server function
4
server.http.host
Specifies the host name. If you do not
specify a host name or specify the default,
Hitachi Command Suite Common Agent
Component automatically acquires the host
name. If the host name cannot be acquired,
you must set it manually so that Global Link
Manager can access Hitachi Command Suite
Common Agent Component.
Default: localhost
5
server.http.socket.agentAddres
s
Specifies the IP address of the host. When
operating in an IPv6 environment, specify a
global address. IPv4 addresses are used
when a site-local address or link-local
address is specified. If you do not specify an
IP address, Hitachi Command Suite
Common Agent Component automatically
acquires the IP address. If the IP address
cannot be acquired, you must set it
manually so that Global Link Manager can
access Hitachi Command Suite Common
Agent Component.
A-6
Notes on Using HDLM Version 5.8 or Later, DMP, or HP-UX Multipathing
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)