Hitachi Global Link Manager Software Installation and Configuration Guide
2. Restart Hitachi Command Suite Common Agent Component.
Stop Hitachi Command Suite Common Agent Component, and then start
the component again. For details on how to start and stop Hitachi
Command Suite Common Agent Component, see Starting and Stopping
Hitachi Command Suite Common Agent Component on page A-11.
Starting and Stopping Hitachi Command Suite Common
Agent Component
When you add a host of HDLM version 5.8 or later, DMP, or HP-UX
multipathing as a resource of Global Link Manager and place the host under
Global Link Manager management, Hitachi Command Suite Common Agent
Component must be running. Depending on the multipath management
software being used, the HDLM, DMP, or HP-UX multipathing must also be
running.
This section describes how to start and stop Hitachi Command Suite Common
Agent Component, and check the operating status.
Although Hitachi Command Suite Common Agent Component starts
automatically during HDLM or Global Link Manager agent installation, in the
following cases, you have to manually stop and then restart the component:
• When you changed the IP address of the host where HDLM or Global Link
Manager agent was installed
• When you modified the property file of Hitachi Command Suite Common
Agent Component
Note:
The Hitachi Command Suite Common Agent Component runs on WOW64
when the host is Windows Server 2003 R2 (x64), Windows Server 2008
(x64), Windows Server 2008 R2 (x64), Windows Server 2012 (x64) or
Windows Server 2012 R2 (x64). Execute the commands provided by the
Hitachi Command Suite Common Agent Component from the command
prompt for WOW64. The following shows an example of executing the
command prompt:
C:\WINDOWS\SysWOW64\cmd.exe
Starting Hitachi Command Suite Common Agent Component
To start Hitachi Command Suite Common Agent Component, execute the
following command, corresponding to the host OS. This operation requires
Administrator or root privileges.
In Windows:
installation-folder-for-Hitachi-Command-Suite-Common-Agent-
Component\bin\hbsasrv.exe start
In Solaris, HP-UX, or Linux:
Notes on Using HDLM Version 5.8 or Later, DMP, or HP-UX Multipathing
A-11
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)