Hitachi Global Link Manager Software Installation and Configuration Guide

Table A-3 hbsasrv Command Syntax
Item Description
Synopsis
hbsasrv [start | stop [-f] | status]
Description Starts or stops the service (or daemon process) of the Hitachi
Command Suite Common Agent Component. Also, this command
displays the status of the service (or daemon process).
Options start: Starts the service (or daemon process).
stop [-f]: Stops the service (or daemon process).
If other Hitachi Command Suite products are installed on the host, you
might not be able to stop Hitachi Command Suite Common Agent
Component. In such a case, the error message KAIE62604-E appears.
Wait until those products complete their operations, and then execute
the command again.
If you urgently need to stop the Hitachi Command Suite Common
Agent Component, you can force the Hitachi Command Suite Common
Agent Component to shut down by executing the hbsasrv command
with the stop -f option. In such a case, all processing is forced to
terminate, thus ongoing processing of jobs is not guaranteed.
status: Displays the service (or daemon process) operating status.
Note: If you execute the command without specifying an argument,
the command usage information is displayed.
Setting for changing the Java program used by Hitachi
Command Suite Common Agent
Use the following procedure to change the Java program used by Hitachi
Command Suite Common Agent.
In Solaris, AIX, or HP-UX, see the explanation of
server.agent.JRE.location in
Table A-1 Properties for Changing the
Settings of Hitachi Command Suite Common Agent Component
(server.properties) on page A-6 in Changing the Settings of Hitachi Command
Suite Common Agent Component on page A-5 and then specify the
installation destination of the Java program.
1. Execute the following command to change the Java program to be used.
In Windows:
"installation-folder-for-Hitachi-Command-Suite-Common-Agent-
Component\bin\javapath_setup.exe
In Linux:
/opt/HDVM/HBaseAgent/bin/javapath_setup.sh
You can specify the following options in the javapath_setup command.
Command format
javapath_setup {-set [new|bundle| Java-execution-environment-
installation-path]|-check}
Notes on Using HDLM Version 5.8 or Later, DMP, or HP-UX Multipathing
A-13
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)