Hitachi Global Link Manager Software Installation and Configuration Guide

The following shows an example of how to specify these settings:

Listen 22015

Listen [::]:22015

Caution: Do not delete or edit the existing Listen line. If you do this,

communication using IPv4 will no longer be available.

Settings When Establishing SSL Communication

Remove the hash mark (#) at the beginning of the line Listen [::]:22016

(when the default setting is used). Specify the same port number as specified

in the Listen line for IPv4. The default value for the port number for SSL

communication is 22016.

The following shows an example of how to specify these settings:

Listen 22016

Listen [::]:22016

Caution: Do not delete or edit the existing Listen line. If you do this,

communication using IPv4 will no longer be available.

Global Link Manager Operation Overview

This section describes the overall flow of tasks for Global Link Manager, from

setup to operations. In addition, the settings necessary to start the

operations and the procedures for logging in to Global Link Manager are

described.

The following figure shows the flow of tasks for operating Global Link

Manager.

Global Link Manager System Configuration and Requirements

1-17

Hitachi Global Link Manager Installation and Configuration Guide (Web Version)