Hitachi Global Link Manager Software Installation and Configuration Guide

procedures, see the Hitachi Command Suite Installation and
Configuration Guide.
Note: If you are installing a Device Manager agent solely to use Global
Link Manager, you must configure the host information necessary for
Global Link Manager, instead of the Device Manager server
information, when you install or set up the Device Manager agent. For
details about how to configure the host information necessary for
Global Link Manager, see Help.
¢
When the HDLM version of a host is 5.8 or later:
To use Global Link Manager to manage HDLM, you have to configure
the settings to use Hitachi Command Suite Common Agent
Component after setting up HDLM. For details about how to configure
the settings, see
Appendix A, Notes on Using HDLM Version 5.8 or
Later, DMP, or HP-UX Multipathing on page A-1.
¢
For DMP or HP-UX multipathing:
To use Global Link Manager to manage DMP or HP-UX multipathing,
you have to install the Global Link Manager agent after setting up
DMP. For details about how to install the Global Link Manager agent,
see
Chapter 7, Settings for Using DMP or HP-UX Multipathing on page
7-1. The Global Link Manager agent is included in Hitachi Command
Suite Common Agent Component. For details about how to use Hitachi
Command Suite Common Agent Component, see
Appendix A, Notes
on Using HDLM Version 5.8 or Later, DMP, or HP-UX Multipathing on
page A-1.
Installing Global Link Manager and setting up its environment
Set up Global Link Manager and start the Global Link Manager server. For
details about the installation and environment setup of the Global Link
Manager server, see
Chapter 2, Installing Global Link Manager on page
2-1 through Chapter 6, Using Global Link Manager with Other Products on
page 6-1 for the appropriate server environment.
Setting up Global Link Manager license information during initial login
After setting up Global Link Manager, in the Global Link Manager GUI,
specify the initial license. For details about how to specify the initial
license, see Setting Up License Information During Initial Login on page
2-26.
For details about the flow of operations of other tasks, description of
functions, and procedure details, see Help.
Global Link Manager System Configuration and Requirements
1-19
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)