Hitachi Global Link Manager Software Installation and Configuration Guide

4. Click the Add button, and then specify the Global Link Manager installer
(setup.exe).
The Global Link Manager installer (setup.exe) is added to the list.
5. Select the check box next to the Global Link Manager installer
(setup.exe), and then click the OK button.
Installing Global Link Manager for the First Time
If other Hitachi Command Suite products have already been installed in a
cluster configuration, remove the cluster configuration before installing Global
Link Manager. To remove the cluster configuration, see
Removing a Cluster
Configuration on page 4-25.
You need to specify the following items when installing Global Link Manager
for the first time. Check these items before the installation.
Table 2-1 Items You Need to Check Before Installation
Item Description
IP address or host name of
the server
Information required for setting the URL used to log in to
Global Link Manager. Check the IP address or host name of
the server on which Global Link Manager is to be installed,
and check the port number for HBase 64 Storage Mgmt
Web Service. The default value for the port number is
22015. This information is not required when another
Hitachi Command Suite product has been installed.
Number of the port for
HBase 64 Storage Mgmt
Web Service
Whether to receive SNMP
traps
Determine in advance whether to use the function that
notifies Global Link Manager of error information by using
SNMP traps if an error occurs on the path to the host.
IP address for receiving
SNMP traps
If you intend to use the SNMP trap receiving function,
check the IP address of the SNMP trap destination. The
default IP address is the IP address of the Global Link
Manager server.
Number of the port for
receiving SNMP traps
When you use the SNMP trap receiving function, check the
port number to be used exclusively by SNMP traps. The
default value for the port number is162. If port number
162 is already used by another program, use another port
number.
To perform a new installation:
1. Insert the Global Link Manager installation DVD-ROM.
In the displayed window, click the Install button next to Hitachi Global
Link Manager Software.
If the window does not appear, directly execute the installer (setup.exe).
The installer is stored in drive-where-installation-DVD-ROM-is-set:\HGLM.
After the installer starts, the Welcome to the Installation of Hitachi
Global Link Manager (New) dialog box appears.
2. Click the Next button.
Installing Global Link Manager
2-5
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)