Hitachi Global Link Manager Software Installation and Configuration Guide

No. Property Name Description
Manager is installed is changed,
reception of SNMP traps becomes
unavailable.
Specifiable value: String of 39
characters or less
Default: --
#1
17 gui.indicator.auto_refresh_interval Specifies the automatic refresh
interval for the Dashboard menu in
the Global Link Manager GUI.
Specifiable value: 1 to 10000
(minutes)
Default: 1
18
server.snmp_transfer.enable
Specifies whether to enable alert
transfer. Specify true to enable alert
transfer. Specify false to disable it.
Specifiable value: true or false
Default: false
19
server.snmp_transfer.ip_address
Specifies the IP address of the alert
transfer destination server. Either an
IPv4 address or IPv6 address can be
specified.
If a firewall is set up between the
Global Link Manager server and the
destination server, be sure to set the
IP address and port number of the
destination server for the firewall.
Note: Do not specify the following
values:
• The IP address specified for
server.snmp.trap_ip_address
• The IP address of the Global Link
Manager server (when the
machine has multiple IP
addresses, the specified IP
address must be different from
any of these IP addresses.)
• 127.0.0.1 and 0.0.0.0 (for
IPv4)
• 0:0:0:0:0:0:0:1 and
0:0:0:0:0:0:0:0 (for IPv6)
• A multicast address (for IPv6)
This can only be used when the
same multicast address is set for
all hosts on the network, and
the multicast address is
operating in the same manner
as IPv4 broadcasts.
• A broadcast address (for IPv4)
Specifiable value: Character string
3-28
Setting Up Global Link Manager
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)