Hitachi Global Link Manager Software Messages

Message ID Message Text Cause Solution
KAIF10007-E An attempt to
stop the alert
management
function has
failed.
Another application might be
using the SNMP port.
Make sure that
another application is
not using the SNMP
port.
If the problem still
persists, collect the
diagnostic information
and contact the
Support Center.
KAIF10008-I : Begin.
Parameter
name.
- -
KAIF10009-I : End.
Parameter
name.
- -
KAIF10010-I Parameter
name has been
set.
- -
KAIF10011-E An exception
occurred.
(details =
Cause of
Failure)
An error occurred during
processing of Hitachi Global
Link Manager.
This message shows
error information. No
action is required.
KAIF10012-I The stack trace
details for the
exception was
output.
- -
KAIF10013-E An attempt to
initialize the
log output
function has
failed. (details
= value
returned by
Log output
function)
An attempt to initialize the log
output function has failed.
Contact the Support
Center.
KAIF10014-E Parameter
name is
invalid.
The specified parameter is
invalid.
Collect the diagnostic
information and
contact the Support
Center.
KAIF10015-E The IP address
format is
invalid.
The possible causes are as
follows:
• The numbers in the IP
address are not delimited
by periods.
• Each IP address setting is
not in the range of 0-255.
Please specify the IP
address in the correct
format.
KAIF10016-E Initialization of
Hitachi Global
Link Manager is
Initialization of Hitachi Global
Link Manager is in progress.
Please wait a while,
and then retry.
Messages with IDs Beginning with KAIF
4-3
Hitachi Global Link Manager Messages