HP XP7 Business Continuity Manager Messages (TK954-96003)

Table 1 Business Continuity Manager error messages and corresponding troubleshooting actions
(message ID YK70x –YK90x) (continued)
Explanation and recommended actionsMessage textMessage ID
Entering the WAKEUP command resumes copy group monitoring
before the duration identified by sleep-time has elapsed.
for max 'sleep-time'
minutes.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
label
Label at which BCM Monitor goes to sleep
sleep-time
Sleep duration
BCM Monitor has reached the point label.time STOPPOINT 'label'
reached.
YK8043I PRT CON
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
BCM Monitor will sleep for the duration identified by sleep-time.time BCM Monitor will
sleep now for max
'sleep-time' minutes.
YK8044I PRT CON
Entering the WAKEUP command resumes copy group monitoring
before the duration identified by sleep-time has elapsed.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
sleep-time
Sleep duration
BCM Monitor has reached the end of a cycle.time BCM Monitor reached
the end of the monitoring
cycle.
YK8045I PRT CON
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
BCM Monitor will execute the operator command identified by
opcmd.
time Execute operator
command 'opcmd'.
YK8046I PRT CON
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
BCM Monitor set the monitoring status of the copy group cgid to
the status status.
time Set
MONITOR=status for
Copy Group 'cgid'.
YK8047I PRT CON
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
List of messages 13