HP XP7 Business Continuity Manager Messages (TK954-96003)

Table 45 Business Continuity Manager error messages and corresponding troubleshooting actions
(message ID YKZ41x) (continued)
Explanation and recommended actionsMessage textMessage ID
systems with the following versions of the storage
system support function:
• XP12000/XP10000 disk array
Version of the storage system support function:
X'11' or higher
• XP24000/XP20000 disk array
Version of the storage system support function:
X'20' or higher
The command cannot be executed for Cnt Ac-S Z
copy groups with the HyperSwap attribute.
This command is invalid for CA Copy
Groups linked with HyperSwap.
YKZ417E MSG SC=48
RC=48
Execute the PPRC copy pair operation from TPC-R.
A resynchronization that reverses the copy direction
cannot be performed with the OPENMFUPDATE
OPENMFUPDATE cannot use with
reverse-resync.
YKZ418E MSG SC=48
RC=48
parameter specified. (The OPENMFUPDATE parameter
is used to modify the Open/MF Consistency
attribute.)
The YKQEXCTG command cannot be executed
because the copy group container does not have an
This command is valid only for copy
group containers with EXCTG ID
specified.
YKZ419E MSG SC=48
RC=48
EXCTG ID. This command is valid only for copy
group containers with an EXCTG ID. Confirm that
the command can be executed on the copy group,
and then re-execute the command.
EXCTG information could not be acquired because
no EXCTG ID for copying in the forward direction is
EXCTG information could not be
acquired because no EXCTG ID is
YKZ420E MSG SC=48
RC=48
specified. The YKQEXCTG command with thespecified for copying in the forward
direction.
TO(SECONDARY) parameter is valid only when
copying in the forward direction and for copy group
containers with an EXCTG ID for the forward
direction. Check the copy direction of the copy group
container and the EXCTG ID direction (Forward or
Reverse), and then re-execute the command.
EXCTG information could not be acquired because
no EXCTG ID for copying in the reverse direction is
EXCTG information could not be
acquired because no EXCTG ID is
YKZ421E MSG SC=48
RC=48
specified. The YKQEXCTG command with thespecified for copying in the reverse
direction.
TO(PRIMARY) parameter is valid only when copying
in the reverse direction and for copy group containers
with an EXCTG ID for the reverse direction. Check
the copy direction of the copy group container and
the EXCTG ID direction (Forward or Reverse), and
then re-execute the command.
This operation cannot be performed for a Non
Gen'ed volume.
This operation (operation) is not
available for a Non Gen'ed volume.
YKZ422E MSG SC=48
RC=48
operation
Operation name
This log message indicates that a CLI command was
issued.
commandYKZ910I CON
command
The name of the issued CLI
command and its parameters
A maximum of 118 characters
can be output. If the number of
List of messages 165