HP XP7 Business Continuity Manager Messages (TK954-96003)

Table 48 Details of error codes 23xx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputA BC copy pair cannot be deleted
because the specified BC copy pair
is in SUSPVS status.
23EF
Not outputOutputThe command could not be
executed because the specified
23F1
C/T group ID is out of the valid
range.
Not outputOutputThe command cannot be executed.
The reason might be one of the
following:
23F2
• The specified C/T group ID is
not registered.
• The copy pair is in the
SIMPLEX status.
• The specified C/T group
contains a copy pair that was
created by using RAID Manager
to specify the BC C/T group ID.
Not outputOutputThe command could not be
executed because the specified
ATTIME suspend time is in the past.
23F3
Not outputOutputThe command used to request that
the ATTIME suspend time
23F4
information be acquired could not
be executed due to the following
reasons:
• The command was issued to the
P-VOL.
• The status of the copy pair is
SIMPLEX.
Make sure that the command is
properly issued and the copy group
definition file has been correctly
configured.
Not outputOutputThe command could not be
executed because the ATTIME
23F5
suspend time is already set. To
change the configuration of the
copy group definition file, first
cancel ATTIME suspension.
Not outputOutputA BC copy pair status cannot be
changed because the specified BC
23FF
copy pair status does not allow the
status to be changed.
182 Storage system sense byte information