HP XP7 Business Continuity Manager Messages (TK954-96003)

Table 64 Details of error codes DBxx – E8xx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
mirror ID in the journal
group.
Not outputOutputNot outputA CAJ copy pair cannot be
made because the maximum
E891
number of copy pairs has
already been registered in the
specified M-JNL or R-JNL group.
Not outputOutputNot outputA CAJ copy pair cannot be
created in a 3DC (CAJxCAJ)
E894
configuration because the third
mirror ID is specified in the
same journal group.
Not outputOutputNot outputRegistration to EXCTG has
failed because the CAJ
E896
program product or the
Disaster Recovery Extended
program product has not been
installed.
Not outputOutputNot outputA CAJ copy pair cannot be
created for one of the following
reasons:
E897
• The specified M-JNL and
R-JNL groups are not set to
be used in 3DC (CAJxCAJ)
configurations.
• The specified R-JNL group
is already in use.
• Another mirror ID is already
defined for the specified
journal group.
Not outputOutputNot outputA CAJ copy pair cannot be
resynchronized because the
E898
specified R-JNL group is in use
as an R-JNL group for a CAJ
copy pair with another mirror
ID.
Not outputOutputNot outputA CAJ copy pair cannot be
made because an inter-DKC
E89A
logical path has not been
established in the forward or
reverse direction. Make sure
that inter-DKC logical paths
have already been established
in both directions.
Not outputOutputNot outputA CAJ copy pair cannot be
made because the status from
E89B
the previous connection with
another storage system remains
in the specified M-JNL or R-JNL
group.
Specify a different journal
group, or delete the specified
journal group and then register
it again.
242 Storage system sense byte information