HP XP7 Business Continuity Manager Reference Guide (TK954-96004)

Status Time . . . : 20080304 12:04:05
------------------------------------------------------------------------------
C/T ID Match CT Delta Pri E Sec E AC Result
AC sub State Rate% DDD HH:MM:SS VOLSER Devn X Dir Devn X Action RC
0E 0E SIMPLEX 000 731E - > 2A1E -
0E 0E SIMPLEX 000 731D - > 2A1D -
0E 0E SIMPLEX 000 731C - > 2A1C -
******************************* Bottom of data ********************************
F1=Help F3=Exit F4=Refresh F6=Sort F7=Backward F8=Forward
“Contents of the Copy Group Pair Status panel” (page 125) describes the items in the Copy Group
Pair Status panel.
Table 73 Contents of the Copy Group Pair Status panel
DescriptionItem
Copy group IDCopy Group ID
A description of the copy groupDescription
The item corresponding to the displayed status timeStatus Time
Specify an action. The following commands can be executed for individual
copy pairs:
AC
• q: Executes the YKQRYDEV command to display the copy pair volume
status.
• m: Executes the YKMAKE command to create copy pairs. See “Executing
YKMAKE” (page 150).
• u: Executes the YKSUSPND command to suspend copy pairs. See
“Executing YKSUSPND” (page 152).
• r: Executes the YKRESYNC command to re-synchronize copy pairs. See
“Executing YKRESYNC” (page 157).
• d: Executes the YKDELETE command to dissolve copy pairs. See “Executing
YKDELETE” (page 160).
1
• c: Executes the YKRECVER command to dissolve copy pairs from the
secondary site. See “Executing YKRECVER” (page 163).
• p: Executes the YKQRYDEV with the PATH parameter specified in order to
obtain the logical path information that is used by copy pairs. See “Path
Set Status of Copy Group Pair Panel (YKQRYDEV with PATH Parameter
Specified)” (page 163).
Consistency group ID at definitionC/T ID
Subconsistency group ID at definitionsub C/T ID
Copy pair statusState
Copy pair matching rate
2, 3
Match Rate%
Displays the difference between the consistency time of the suspended S-VOLs
and the current time when a copy pair is suspended in CAA or CAJ.
3
CT Delta
DDD HH:MM:SS
When BC or CA, or information cannot be acquired from the secondary site,
(for example, the command device is not defined), it is not displayed. Only
if the C/T group timer type is SYSTEM, it is displayed.
For CAJ, the type of consistency time to be used differs depending on the
value specified in C/T TIME MODE of the Copy Group Attribute (CAJ) panel.
For details about the consistency time, see the HP XP7 Continuous Access
Journal for Mainframe Systems User Guide or the HP XP7 Storage User Guide,
HP XP10000 Disk Array, HP 200 Storage Virtualization System.
Volume serial numberVOLSER
P-VOL device numberPri Devn
Manage Copy Groups Panel (Copy Group Operation) 125