HP XP7 Business Continuity Manager Reference Guide (TK954-96004)

Table 151 Path Set Structure (continued)
DescriptionREXX variables
Interface version of primary storage systemIFType
Primary path group IDPathID
1
Primary SSIDSSID
2
Primary CU numberCUNum
The CCA of the device to which I/Os are issued when
path operations are performed on the primary site where
the path is used.
CCA
The device number of the device to which I/Os are issued
when path operations are performed on the primary site
where the path is used.
DEVN
Serial number of secondary storage systemSerialNumSec
Type of secondary storage systemModel
• USP (XP12000/XP10000)
• USPV (XP24000/XP20000)
• VSP (XP P9500)
• VSPG1000 (XP7)
Interface version of secondary storage systemIFType
Secondary path group IDPathID
1
Secondary SSIDSSID
2
Secondary CU numberCUNum
The CCA of the device to which I/Os are issued when
path operations are performed on the secondary site
where the path is used.
CCA
The device number of the device to which I/Os are issued
when path operations are performed on the secondary
site where the path is used.
DEVN
Number of defined physical paths from the primary site
to the secondary site (0 to 8)
0P2S
Status of a logical pathStatus
3
n
The initiator port number of the primary site of the logical
path (on the storage system indicated by
Pri.SerialNum)
portPri
The target port number of the secondary site of the logical
path (on the storage system indicated by
Sec.SerialNum)
portSec
The number of physical paths from the primary site to the
secondary site set in the storage system (0 to 8)
0Setting
The number of defined physical paths from the secondary
site to the primary site (0 to 8)
0S2P
Status of a logical pathStatus
3
n
The target port number of the primary site of the logical
path (on the storage system indicated by
Pri.SerialNum)
portPri
348 Data Objects