HP XP7 RAID Manager Reference Guide (T1610-96064)

OptionCommandLDEVExternal
volume/VDEV
Parity
group
Host
group
PortRes.
group
-raidcom delete resource-----Auth
-ldev_id <ldev#>raidcom delete resourceLock/auth----Lock/auth
-port <port#>raidcom delete resource----Lock/authLock/auth
-port <port#> <host
group name>
raidcom delete resource---Lock/auth-Lock/auth
-parity_grp_id
<gnosgno>
raidcom delete resource--Lock/auth--Lock/auth
-external_ grp_id
<gno-sgno>
raidcom delete resource-Lock/auth---Lock/auth
Setting range of command parameter
The effective range of parameters in the following table differs by the storage system type. RAID
Manager commands may be accepted even if the specified value is out of the effective range.
Storage system typeItemParameter
XP7P9500
0 - 652790 - 65279LDEV number-ldev_id
gno : 1 - 24gno : 1 - 32parity group number-parity_grp_id
sgno : 1 - 24sgno : 1 - 16
0 - 632320 - 63232external volume path group
number
-path_grp
0 - 150 - 7MP blade ID-mp_blade_id
raidcom add copy_grp
Creates a copy group.
Syntax
raidcom add copy_grp -copy_grp_name <copy group name>
<device group name> [<device group name>] [-mirror_id <mu#>
-journal_id <journal ID#>]
Options and parameters
DescriptionOption
Specifies the device group (maximum 32 characters) configuring a copy group (maximum
32 characters).
-copy_grp_name <copy
group name><device
You can specify up to two device group names. If you specify more than two, the option
is ignored.
group name>[<device
group name>]
For a copy group for an Business Copy pair, specify two device groups.
For a copy group for a Continuous Access Synchronous pair, specify only one device group
for the relevant storage system side (primary/main or secondary/remote).
Specifies the mirror ID.[-mirror_id <mu#> ]
If this option is omitted (by raidcom get copy_grp), "-" is displayed.
Specifies the journal number (0-255).[ -journal_id <journal
ID#> ]
140 Configuration setting commands