HP XP7 RAID Manager Reference Guide (T1610-96064)

PORT: Displays the port numbers.
TYPE: Displays the following package type on a port: FIBRE, SCSI, ISCSI, ENAS, ESCON, FICON,
FCoE
ATTR: Displays the following attribute setting on a port. One of the following items is displayed.
• TAR: Fibre target port (target port)
• MCU: MCU initiator port (initiator port)
• RCU: RCU target port (RCU target port)
• ELUN: External initiator port (External port)
SPD: Displays the transfer rate setting on a port. One of the following values is displayed:
AUT(AUTO), 1G, 2G, 4G, 8G, 10G…
LPID: Displays the Loop ID(AL_PA) setting on a port.
FAB: Displays the fabric mode setting on a port as Y(YES) or N(NO).
CONN: Displays the following topology setting on a port: FCAL/PtoP
SSW: Displays the LUN security setting on a port as Y (enabled) or N (disabled).
SL: Displays the SLPR number to which the port belongs.
Serial#: Product serial number.
For XP7 Storage, the number of which 300,000 is added to the serial number is displayed.
WWN: Displays the external WWN.
PHY_PORT: Displays the port number of the physical port in a resource ID takeover configuration.
Displaying the information of the port CL4-E.
# raidcom get port -port CL4-E
PORT LOGIN_WWN Serial# -
CL4-E 210000e08b0256f8 63528 OLA_NODE0_CTL_0
CL4-E 210000e08b039c15 63528 OLA_NODE1_CTL_0
Description of each column in output example
PORT: Displays the port numbers.
LOGIN_WWN: Displays WWN of the host adapter login to this port.
Note: Only the currently connected WWN is displayed unlike the display on Remote Web Console.
Serial#: Product serial number.
For XP7 Storage, the number of which 300,000 is added to the serial number is displayed.
For example, for getting information on FCoE option:
# raidcom get port -port CL4-E -key opt
PORT ENMA VLAN_ID FPMA
VPS VP_I FCF_ICL4-E e3:00:00:e0:8b:02 0x03fe
e2:00:00:e0:8b:02 DWN 0x00 0x0000
Description of each column in output example.
PORT: Displays the port number.
ENMA: Displays Enode MAC address setting to this port.
VLAN_ID: Displays the VLAN identifier.
FPMA: Displays FP MAC address setting to this port.
VPS: Displays the virtual port status.
• DWN: the Link status is in Link Down.
• LOT: the Link status is in Link Up and Log-Out.
• LIN: the Link status is in Link Up and Log-In.
raidcom get port 191