HP XP7 RAID Manager Reference Guide (T1610-96064)

VP_I: Displays the virtual port index (zero is currently displayed).
FCF_I: Displays the FCoE index (zero is currently displayed).
raidcom modify port
This sets the attribute value of the specified port.
When the value other than the port attribute value is specified, the specified port must be
"TYPE=FIBRE or FCoE package and ATTR=TAR". If not, this command is rejected with EX_ENOOBJ.
When using a package of Fiber Channel over Ethernet, specify Port speed: 10G, Port topology:
f_port. In this case, port attribute cannot be changed.
Syntax
raidcom modify port -port <port#>{[-port_speed <value>]
[-loop_id <value>][-topology <topology>]
[-security_switch {y | n}]
| -port_attribute <port attribute>}
Options and parameters
DescriptionOption
Specifies the port number. For example:
• CL1-A
-port <port#>
Specifies the HOST speed (0, 1, 2, 4, 8, 10, 16) as follows.[-port_speed <value> ]
0: AUTO
1: 1G
2: 2G
4: 4G
8: 8G
10: 10G
16: 16G
Specifies the Loop ID (0x01-0xEF) of the Port.[-loop_id <alpa value> ]
Specifies the topology of the Port as follows:[-topology < topology> ]
fl-port : fabric on and fcal
f-port : fabric on and PtoP
nl-port : fabric off and fcal
n-port : fabric off and PtoP
Specifies whether to use the security switch or not.[-security _switch {y | n} ]
Specifies the Port attribute as follows:-port_attribute <port
attribute>
TAR: Fibre target port (target port)
MCU: MCU initiator port (initiator port)
RCU: RCU target port (RCU target port)
ELUN: External initiator port (External port)
If this port attribute is changed from Target or RCU Target to Initiator or External, the host
group belonging to this port belongs to meta_resource.
Examples
Changing the port attributes (the Loop ID and the topology of the Port) of a port CL3-E.
# raidcom modify port -port CL3-E -loop_id 0xAB -topology fl_port
192 Configuration setting commands