HP XP7 RAID Manager Reference Guide (T1610-96064)

DescriptionOption
Specifies the port number of the MCU.-mcu_port <port#>
Specifies the port number on the RCU (storage system port on the remote side).-rcu_port <port#>
Specify the port that the attribute is MCU Initiator port (MCU) or RCU Target port (RCU).
Example
Register P9500 of Serial number: 64034 with CU free. Sets the path group ID: 0, the port on
MCU: CL1-A, and the port on RCU: CL1-B.
# raidcom add rcu -cu_free 64034 R700 0 -mcu_port CL1-A -rcu_port CL1-B
raidcom delete rcu
Deletes the RCU.
This command is executed asynchronously with the command input. Check the completion of this
process on the raidcom get command_status command.
Syntax
raidcom delete rcu {-rcu <serial#> <mcu#> <rcu#> -ssid <ssid>
| -cu_free <serial#> <id> <pid>
Options and parameters
DescriptionOption
Specifies the CU specified by serial number, <mcu#>, <rcu#>. For XP7 Storage,
specify the number of which 300,000 is added to the serial number for <serial#>.
-rcu <serial#> <mcu#> <rcu#>
You can use hexadecimal numbers (add "0x" prefix) or decimal numbers for <mcu#>
and <rcu#>.
Specifies the subsystem ID.-ssid <ssid>
You can use hexadecimal numbers (add "0x" prefix) or decimal numbers for <ssid>.
Specifies the CU free specified by serial#, id#, pid# for setting the RCU to be deleted.
For XP7 Storage, specify the number of which 300,000 is added to the serial number
for <serial#>.
-cu_free <serial#><id><pid>
< id > specifies the storage system type as follows:
• For XP7 use R800.
• For P9500 use R700.
• For XP24000/XP20000 Disk Array use R600.
• For XP12000 Disk Array/XP10000 Disk Array use R500.
< pid> specifies the path group ID (0-255).
Note: Deleting the RCU registered by specifying "0" for <pid> causes removal of the
display as shown by default on the GUI of Continuous Access Synchronous,
Continuous Access Journal, or Continuous Access Journal Z.
Examples
Deleting the P9500 for which the product number: 64034, the RAID type: R700 and the path
group ID: 1 are set.
# raidcom delete rcu -cu_free 64034 R700 1
raidcom get rcu
Displays MCU/RCU information.
raidcom delete rcu 195