HP XP7 RAID Manager Reference Guide (T1610-96064)

Examples
Giving the nickname of "ORA_NODE0_CTL_0" to the connection host "WWN:
210000e0,8b0256f8" to which the port: CL4-E and host group #0 are set.
# raidcom set hba_wwn -port CL4-E-0 -hba_wwn 210000e0,8b0256f8
-wwn_nickname ORA_NODE0_CTL_0
raidcom reset hba_wwn
Deletes the nickname from the specified WWN on the specified port.
If there is no specified port, the command is rejected with EX_ENOOBJ.
syntax
raidcom reset hba_wwn -port <port#>[<host group name>]
-hba_wwn <WWN strings>
Options and parameters
DescriptionOption
Specifies the port number. For example:-port <port#>[<host
group name>]
• CL1-A-g (g: 0-254)
• CL1-A Linux_X86
Specifies WWN value (Hexadecimal value). For example:-hba_wwn <WWN
strings>
• 210000e08b0256f8
• 210000e0,8b0256f8 (The value can be split in units of 4 bytes by "," (commas).
Examples
Deleting the nickname that is given to the connection host "WWN:210000e0,8b0256f8" to which
the port: CL4-E and Host group #0 are set.
# raidcom reset hba_wwn -port CL4-E-0 -hba_wwn 210000e0,8b0256f8
raidcom monitor pool
Sets the start or stop of performance monitoring of a pool for Smart Tiers and Smart Tiers Z.
Syntax
raidcom monitor pool -pool {<pool ID#> | <pool naming>}
-operation <type>
Options and parameters
DescriptionOption
Specifies the pool ID (0-127) or pool name of a pool for Smart Tiers or Smart Tiers Z.-pool {<pool ID#> |
<pool naming>}
When specifying just a number, it is recognized as a pool ID. Therefore, when you specify a
pool that the pool name is only a number, operate by specifying pool ID instead of specifying
pool name.
Instructs the operation of performance monitoring.-operation <type>
The operational types that can be specified are shown below.
start: Start the performance monitoring.
stop: Stop the performance monitoring.
raidcom reset hba_wwn 211