HP XP7 RAID Manager Reference Guide (T1610-96064)

DescriptionOption
This option must be specified if '-find' or '-pd <raw_device>'option is not specified.
[hgrp] is specified to display only the LDEVs mapped to a host group on a port (XP1024/XP128
Disk Array and later).
Specifies the raw device name. This option finds Seq# and port_name of the storage system to
which the specified device can be connected, and scans the port of the storage system which
-pd[g] <raw_device>
corresponds with the unit ID that searches the unit ID from Seq#. This option must be specified
if the '-find' option is not specified. If this option is specified, the following -s <Seq#> option is
invalid.
The -pdg option is used when displaying a LUN on the host view by finding a host group
(XP1024/XP128 Disk Array and later).
Used to specify the Seq# (serial#) of the storage system when this option cannot specify the unit
ID which is contained for '-p <port>' option. This option scans the port specified by '-p <port>'
-s <Seq#>
option of the storage system which corresponds with the unit ID that searches the unit ID from
Seq#. If this option is specified, then the unit ID that is contained in '-p <port>' option is invalid.
For XP7, specify the number of which 300,000 is added to the serial number.
Specifies the target ID of the specified port. If this option is not specified, the command applies
to all target IDs.
-t <targ>
Specifies the LUN of the specified target ID. If this option is not specified, the command applies
to all LUNs. If this option is specified, the TID must also be specified.
-l <lun>
Specifies display of volume-type for a display column. If this is specified, -f[g] [d] option is
invalid.
-f or -ff
Displays the LDEV number in hexadecimal notation.-fx
Specifies display of group_name for a display column. This option searches a group on the
configuration definition file (local RAID Manager instance) from the scanned LDEV, and displays
-fg
a group_name when the scanned LDEV is contained in the group. If this option is specified, the
-f[f] option is not allowed and the -f[d] option is invalid.
Displays the Device_File that was registered to the group of the HORCM in the output, based
on the LDEV (as defined in local instance config. def. file). If this option is specified, -f[f][g]
option is not allowed.
-fd
Displays the serial# (E-Seq#) and LDEV# (E-LDEV#) of the external LUNs only mapped to the
LDEV. If the external LUN mapped to the LDEV on a specified port does not exist, then this option
-fe
will do nothing. Also if this option is specified, -f[f][g][d] option is not allowed. For XP7, specify
the number of which 300,000 is added to the serial number for Seq#.
Display example:
# raidscan -p cl1-a-0 -fe -CLI
PORT# /ALPA/C TID# LU# Seq# Num LDEV# P/S Status Fence
E-Seq# E-LDEV#
CL1-A-0 ef 0 0 48 62468 2 256 SMPL - -
30053 17
CL1-A-0 ef 0 0 49 62468 2 272 SMPL - -
30053 23
CL1-A-0 ef 0 0 50 62468 1 288 SMPL - -
30053 28
Specifies display for command line interface (CLI). This option displays to the same position that
defined number of columns, and displays one header. The delimiters between columns are
displayed as spaces or hyphens (-).
-CLI
Display example:
Port# TargetID# Lun# Seq# Num LDEV# P/S Status Fence P-
Seq# P-LDEV#
CL1-C 1 0 30053 1 274 SMPL - -
- -
CL1-C 2 2 30053 1 260 P-VOL PAIR NEVER
30053 268
raidscan 69