HP XP7 RAID Manager User Guide (T1610-96063)

Table 54 SSB codes returned by raidcom check_ext_storage path (continued)
raidcom check_ext_storage path
DescriptionError codeExecuting/
Async
Error message
SSB2SSB1
There is no specified external volume.41002E20AsyncGet Command Status
There is no specified path.43002E20Async/Get Command Status
ExecutingCMDRJE
WWN is not registered.44002E20ExecutingCMDRJE
The path group is not registered.45002E20ExecutingCMDRJE
The path group does not exist.45002E20ExecutingCMDRJE
Online from the mainframe host.001E2E30AsyncGet Command Status
The port attribute is not External (ELUN).84002E30ExecutingCMDRJE
The command cannot be accepted. After a while, execute the
same command.
00EE2EDAExecutingCMDRJE
An internal error occurred by the operation of external path.09052EDAAsyncGet Command Status
Call HP Technical Support.
Table 55 SSB codes that are returned by raidcom disconnect external_grp command
raidcom disconnect external_grp
DescriptionError codeExecuting/
Async
Error message
SSB2SSB1
The external volume group is not in the effective range.41002E00ExecutingCMDRJE
The specified LDEV is used as a Business Copy pair.00002E10ExecutingCMDRJE
It is used as a Continuous Access Synchronous or Continuous
Access Journal pair.
00012E10ExecutingCMDRJE
A Business Copy pair, a Fast Snap/Snapshot pair or a
Compatible FlashCopy relationship or in status of splitting or
pending exists.
00032E10ExecutingCMDRJE
The specified LDEV is used as a Fast Snap or Snapshot pair.00042E10ExecutingCMDRJE
It is used as a system disk.00082E10ExecutingCMDRJE
It is used as a concurrent copy or a XRC.00122E10ExecutingCMDRJE
The specified external volume group is in the state of
disconnected.
41002E10ExecutingCMDRJE
The specified external device is in the state of disconnected.41022E10ExecutingCMDRJE
The specified external volume has already disconnected the
path, or is in the process of checking path.
43012E10ExecutingCMDRJE
It is in the state of shredding.00072E11ExecutingCMDRJE
The target LDEV is blocked.001B2E11ExecutingCMDRJE
The path for the specified external path is in the state of
disconnected.
40002E11ExecutingCMDRJE
All the paths for the specified external path are blocked.43022E11ExecutingCMDRJE
234 Troubleshooting