HP XP7 RAID Manager User Guide (T1610-96063)

Table 76 SSB codes that are returned by raidcom add lun command (continued)
raidcom add lun
DescriptionError codeExecuting/
Async
Error message
SSB2SSB1
The other than HMDE volume or OPEN volume is included in
the specified LDEV.
0155B958ExecutingCMDRJE
An LU path has already defined in the relevant LDEV.015AB958ExecutingCMDRJE
An invalid LDEV exists in the specified LDEVs.015DB958ExecutingCMDRJE
It exceeds the maximum LUN under the port.015EB958ExecutingCMDRJE
LDEV is set as a pool volume.0178B958ExecutingCMDRJE
LUN path cannot be set because the LDEV is a system disk.017BB958ExecutingCMDRJE
LUN path cannot be set because the LDEV is a journal volume.017CB958ExecutingCMDRJE
LUN path cannot be set because the access attribute of LDEV
Data Retention is reserved.
017DB958ExecutingCMDRJE
When the host mode is External Storage(0x4C), the LUN path
cannot be set in the other than the external volume.
01A3B958ExecutingCMDRJE
The host group and the LDEV that configure the LU path do not
exist in the same virtual storage machine.
01F2B958ExecutingCMDRJE
The LU path definition cannot be set because the virtual LDEV
information of the specified LDEV is not defined yet.
01F3B958ExecutingCMDRJE
Command device cannot be set because it is reserved for Auto
LUN.
0601B958ExecutingCMDRJE
Command device cannot be set because it is an Business Copy
pair/or it is reserved.
0606B958ExecutingCMDRJE
The command device cannot be operated because it is used at
the local RAID Manager.
0639B958ExecutingCMDRJE
A command device cannot be set because LDEV is other than
the OPEN volume.
064AB958ExecutingCMDRJE
The specified LDEV is not installed.065DB958ExecutingCMDRJE
A command device cannot be set because LDEV is the virtual
volume of Fast Snap or Snapshot.
0679B958ExecutingCMDRJE
The command cannot be operated because the virtual LDEV is
not defined yet.
0927B958ExecutingCMDRJE
The value of LUN exceeds the maximum.0944B958ExecutingCMDRJE
The value of LDEV exceeds the maximum.0945B958ExecutingCMDRJE
Another LDEV is already mapped to the specified LUN.0947B958ExecutingCMDRJE
The value of Host group ID exceeds the maximum.0956B958ExecutingCMDRJE
The program product is not installed.0957B958ExecutingCMDRJE
The specified host group is not installed.0959B958ExecutingCMDRJE
An invalid LDEV exists in the specified LDEVs.095DB958ExecutingCMDRJE
The multiple LDEV cannot be specified.098CB958ExecutingCMDRJE
When the host mode option 60 is set, LUN path of LUN0 cannot
be set or released.
098DB958ExecutingCMDRJE
Error messages and error codes 255