HP XP7 RAID Manager User Guide (T1610-96063)

Table 81 SSB codes returned by raidcom add snapshot (continued)
raidcom add snapshot
DescriptionError codeExecuting/AsyncError message
SSB2SSB1
The specified pair operation cannot be performed for the
specified pool.
60042E13ExecutingCMDRJE
The consistency group to be used in the specified Snapshot
Group is in one of the following status:
99002E13ExecutingCMDRJE
• The number of pairs that can be defined in a consistency
group exceeds the maximum.
• The pair created by using the same P-VOL already exists
in the specified consistency group.
The specified LDEV is not defined.00002E20ExecutingCMDRJE
The command ends abnormally because an unmounted
volume is specified as the P-VOL of a Fast Snap or Snapshot
pair.
00082E20ExecutingCMDRJE
The command ends abnormally because the blocked
volume is specified as the P-VOL of a Fast Snap or Snapshot
pair.
00092E20ExecutingCMDRJE
The command ends abnormally because the volume in
formatting operation is specified as the P-VOL of a Fast
Snap or Snapshot pair.
000A2E20ExecutingCMDRJE
The command ends abnormally because an unmounted
volume is specified as the S-VOL of a Fast Snap or Snapshot
pair.
000B2E20ExecutingCMDRJE
The command ends abnormally because the blocked
volume is specified as the S-VOL of a Fast Snap or Snapshot
pair.
000C2E20ExecutingCMDRJE
The command ends abnormally because the volume in
formatting operation is specified as the S-VOL of a Fast
Snap or Snapshot pair.
000D2E20ExecutingCMDRJE
The command ends abnormally because the shared
memory (FC, TPF, or Extension1) is not expanded for
necessary capacity.
81072E21ExecutingCMDRJE
The command ends abnormally because the shared
memory (SS1 or more) is not expanded for necessary
capacity.
81082E21ExecutingCMDRJE
A Fast Snap or Snapshot pair cannot be created due to
one of the following reasons:
81092E21ExecutingCMDRJE
• The shared memory is not expanded for necessary
capacity.
• It is in the initializing process.
The program product is not installed.90102E21ExecutingCMDRJE
A pair cannot be created because the volume is already
used in the S-VOL of a Fast Snap or Snapshot pair is
specified as the P-VOL.
00762E30ExecutingCMDRJE
A pair cannot be created because the volume is already
used in the P-VOL of a Fast Snap or Snapshot pair is
specified as the S-VOL.
00772E30ExecutingCMDRJE
266 Troubleshooting