HP XP7 RAID Manager User Guide (T1610-96063)

Table 93 SSB codes that are returned by raidcom delete ldev command
raidcom delete ldev
DescriptionError codeExecuting/
Async
Error message
SSB2SSB1
It exceeds the range of LDEV number.00002E00ExecutingCMDRJE
This command does not support the emulation type of the
specified LDEV.
000E2E00AsyncGet Command Status
The specified LDEV is used as a pair of Business Copy/Fast
Snap/Snapshot/Auto LUN V2 or a relationship of Compatible
FlashCopy/Compatible FlashCopy SE.
00002E10AsyncGet Command Status
The specified LDEV is used as a Continuous Access Synchronous
pair, a Continuous Access Journal pair or a command device
defined by Business Continuity Manager.
00012E10AsyncGet Command Status
The specified LDEV is used as a Continuous Access Journal pair
or a journal.
00022E10AsyncGet Command Status
The specified LDEV is used as a Compatible FlashCopy
relationship.
00032E10AsyncGet Command Status
The specified LDEV is used as a Fast Snap or Snapshot pair.00042E10AsyncGet Command Status
The specified LDEV is used as a Auto LUN.00052E10AsyncGet Command Status
The specified LDEV is used as a system disk.00082E10AsyncGet Command Status
The specified LDEV is used as a CC/XRC attribute device.00122E10AsyncGet Command Status
An LDEV that is in the state of formatting is included in the parity
group of the target LDEV.
00042E11AsyncGet Command Status
An LDEV that is in the state of executing quick format is included
in the parity group of the target LDEV.
00052E11AsyncGet Command Status
The specified LDEV is used in another operation.00532E11ExecutingCMDRJE
The parity group of the target LDEV is in the state of correction
copy.
01022E11AsyncGet Command Status
The parity group or the external volume group that the specified
LDEV is belongs to is used in another operation.
01532E11ExecutingCMDRJE
The operation of Thin Provisioning V-VOL cannot be done
because there is a blocked pool.
60042E11AsyncGet Command Status
The operation cannot be done because the internal processing
is in progress.
80042E11AsyncGet Command Status
The storage system is in internal process, or the configuration
changing processes are conflicting.
80102E11ExecutingCMDRJE
The operation cannot be done because there is blocked part in
the system.
81082E11AsyncGet Command Status
The command cannot be accepted. After a while, execute the
same command.
94002E11ExecutingCMDRJE
LDEV is not installed.00002E20ExecutingCMDRJE
AsyncGet Command Status
An LU path has been defined.00072E30ExecutingCMDRJE
The specified LDEV is used as a Thin Provisioning.000A2E30AsyncGet Command Status
The specified LDEV is used as a pool volume.000E2E30AsyncGet Command Status
282 Troubleshooting