HP XP7 RAID Manager User Guide (T1610-96063)

Table 104 SSB codes that are returned by raidcom modify host_grp command (continued)
raidcom modify host_grp
DescriptionError codeExecuting/
Async
Error message
SSB2SSB1
The host group ID exceeds the maximum.0956B958ExecutingCMDRJE
The program product is not installed.0957B958ExecutingCMDRJE
The specified host group is not installed.0959B958ExecutingCMDRJE
The command device being used at the local RAID Manager
exists under the host group.
B9F9B9F9ExecutingCMDRJE
Table 105 SSB codes that are returned by raidcom disconnect path command
raidcom disconnect path
DescriptionError codeExecuting/
Async
Error message
SSB2SSB1
The path group is out of the enabled range.45002E00ExecutingCMDRJE
The value of specified port is invalid.84002E00ExecutingCMDRJE
The specified external path has already disconnected the path,
or is in the process of checking path.
43012E10AsyncGet Command Status
The target LDEV is blocked.001B2E11AsyncGet Command Status
The path for the specified external path is in the state of
disconnected.
40002E11AsyncGet Command Status
This command cannot be operated due to one of the following
reasons:
43022E11AsyncGet Command Status
• All the paths to the external volumes are blocked.
• There will be no normal paths.
The command cannot be accepted. After a while, execute the
same command.
94002E11ExecutingCMDRJE
There is no specified external volume.41002E20Executing/AsyncGet Command Status
CMDRJE
There is no connection path to an external volume.43002E20Executing/AsyncGet Command Status
CMDRJE
WWN is not registered.44002E20ExecutingCMDRJE
There is no path group.45002E20ExecutingCMDRJE
external_wwn is not defined.45002E20ExecutingCMDRJE
Online from the mainframe host.001E2E30AsyncGet Command Status
The attribute of a port is not External(ELUN).84002E30ExecutingCMDRJE
The command cannot be accepted. After a while, execute the
same command.
00EE2EDAExecutingCMDRJE
An internal error occurred by the operation of a path for an
external path.
09052EDAAsyncGet Command Status
Call HP Technical Support.
288 Troubleshooting