HP XP7 Remote Web Console Messages (H6F56-96010)

ManualsBrandsHP ManualsComputer AccessoriesHP P9500 Disk Array DKC Module-1 Controller Rack

Table 3 Error codes (part code 00003) (continued)

Severity

Level

Recommended ActionError MessageError

Number

Part

Code

Communication busy.

WWait, then click [Refresh] on the [File] menu.

When an error occurs during a login, wait, then

The SVP is not ready yet, or an internal

processing is being executed.

00203300003

ECheck the DKC status and the current status of the

configuration setting. If necessary, re-execute the

setting operation.

Unexpected error occurred. Please

refresh the array configuration. The

storage system status is invalid.

00208300003

ECheck the DKC status and the current status of the

configuration setting. If necessary, re-execute the

setting operation.

Unexpected error occurred. Please

refresh the array configuration. The

storage system status is invalid.

00208400003

EWhen the same problem persists, please contact

HP Technical Support.

Error happened after some change

occurred. Please refresh the array

00209800003

configuration. The operation cannot be

performed, because the SVP microcode

version does not match the

DKCMAIN(storage system) microcode

version.

WWait a while, then retry the operation. If the same

problem persists, please contact HP Technical

Support.

Error happened after some change

occurred. Please refresh the array

configuration. The operation cannot be

00209900003

performed, because an inoperative MP

exists.

WClick [Refresh All] on the [File] menu, then refresh

the configuration.

An error occurred while connecting to

the storage system. The configuration

may be inconsistent.

00210000003