HP XP7 Remote Web Console Messages (H6F56-96010)

Table 58 Error codes (part code 06505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WVerify the status of the primary volume from the
host or the SVP.
The operation cannot be performed
because the volume specified as the
00879506505
primary volume is used by Business
Copy or Business Copy Z and applies
to either of the following:
• A secondary volume, which is not in
the PSUS status.
• A volume in the Reverse Copy status.
WVerify the status of the volume specified as a
secondary volume.
A volume cannot be used as a
secondary volume when:
00881906505
• It is in an intervention-requested
condition.
• It is in a protection condition.
• It is in an unusable condition.
• It is a Business Copy or Business
Copy Z secondary volume.
• It is in use by Auto LUN.
• It is a Business Copy primary volume
in the Swap or Reverse Copy status.
• It is a Business Copy Z primary
volume in the Swap or Reverse Copy
status.
EVerify the SSB log, and then contact HP Technical
Support.
An I/O error occurred in the secondary
volume.
00882206505
WWait for a while, and then retry the operation.The Create Pairs operation cannot be
performed because data volume
00883206505
migration by Auto LUN is in progress on
the specified primary volume.
WWait for a while, and then retry the operation.The Create Pairs operation cannot be
performed because data volume
00883306505
migration by Auto LUN is in progress on
the specified secondary volume.
WSee the license key and confirm the licensed
capacity of the volumes. To create more pairs,
The operation failed because you tried
to create volume pairs which exceeded
the licensed capacity.
00883406505
purchase a license key that allows you to use a
larger capacity.
WSee the license key information of the remote
storage system and verify the licensed volume
The operation failed because you tried
to create volume pairs which exceeded
00883506505
capacity. To create more pairs, purchase a license
key that allows you to use a larger capacity.
the licensed capacity of the Remote
Storage System.
EVerify the SSB log, and then contact HP Technical
Support.
An internal error occurred.00888706505
EVerify the SSB log, and then contact HP Technical
Support.
An internal error occurred.00888806505
WRefresh the window, and then retry the operation.
If this problem persists, contact HP Technical
Support.
The specified port isn't equipped.00888906505
WWait until the initialization of the specified port
is complete, and then retry the operation.
The specified port is being initialized.00889006505
172 Message (part code group 06nnn)