HP XP7 Remote Web Console Messages (H6F56-96010)

Table 58 Error codes (part code 06505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WVerify the settings.A request to create a pair using a
journal in the configuration consisting of
07826506505
three Continuous Access Journal sites
was received. However, the operation
failed because a pair creation for the
Delta resync is specified.
WVerify the serial number, the model, and the path
group ID of the specified secondary storage
system.
A Create Pairs failed because the serial
number, the model, or the path group
ID of the specified Remote Storage
System is invalid.
07827006505
WContact HP Technical Support to verify that the
microcode versions of the storage systems support
the 2DC or 3DC configuration.
The Create Pairs operation cannot be
performed because one of the storage
systems does not support the 2DC or
3DC configuration.
07827106505
WVerify the microcode version of the specified
remote storage system. If the microcode version
The Create Pairs operation cannot be
performed due to either of the following
reasons:
07827206505
supports the connection with the local storage
system, select a different volume, and then retry
the operation.
• The microcode version of the
specified remote storage system does
not support the connection with the
local storage system.
• The specified secondary volume is
already used by Continuous Access
Synchronous.
WVerify the microcode version of the local storage
system and the models of the local and remote
storage systems.
The Create Pairs operation cannot be
performed because the local storage
system is in either of the following
conditions:
07827306505
• Its microcode version does not
support the connection with the
remote storage system.
• It is a storage system that cannot be
connected with the remote storage
system.
WVerify the microcode version of the local storage
system and the models of the local and remote
storage systems.
The Create Pairs operation cannot be
performed because the local storage
system is in either of the following
conditions:
07827406505
• Its microcode version does not
support the connection with the
remote storage system.
• It is a storage system that cannot be
connected with the remote storage
system.
WIn a configuration in which 3 Continuous Access
Journal sites are combined, perform reverse resync
The Resync Pairs operation cannot be
performed because the specified restore
07827506505
for a pair, whose secondary volume is also usedjournal is already used as a restore
journal. for a pair in the specified mirror, in a different
mirror from RAID Manager or Business Continuity
Manager, and then retry the operation.
In other configurations than the above, delete a
pair, whose secondary volume is also used for a
pair in the specified mirror, in a different mirror,
and then retry the operation.
200 Message (part code group 06nnn)