HP XP7 Remote Web Console Messages (H6F56-96010)

Table 58 Error codes (part code 06505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WVerify the status of the secondary volume from
RAID Manager or Business Continuity Manager,
and then perform the following operations:
The Resync Pairs operation cannot be
performed because the specified
secondary volume is already used as a
secondary volume of a pair in a different
07827606505
• In a configuration in which 3 Continuous
Access Journal sites are combined, perform
mirror and the pair status is not
applicable to the operation.
reverse resync for a pair, whose secondary
volume is also used for a pair in the specified
mirror, in a different mirror from RAID
Manager or Business Continuity Manager, and
then retry the operation.
• In other configurations than the above, delete
a pair, whose secondary volume is also used
for a pair in the specified mirror, in a different
mirror, and then retry the operation.
WSpecify a volume with capacity of 1.5 GB or
more, and then retry the operation.
The specified volume cannot be used as
a journal volume because the capacity
of the volume is not enough.
07827706505
WVerify the microcode version of the remote storage
system. If the microcode version only supports
The Create Pairs operation cannot be
performed because the remote storage
07828106505
Default for the path group ID, specify Default forsystem does not support the specified
path group ID. the ID, and then perform the Create Pairs
operation.
WWait until the status transition of the different
mirror is complete (Initial/Stopped), and then retry
the operation.
A pair operation cannot be performed
because a different mirror of the
specified restore journal is in status
transition (Halting/ Stopping).
07828506505
WIf the extended shared memory is not installed on
the local storage system, install it, and then retry
The Create Pairs operation cannot be
performed because there is not enough
07829406505
the operation. If the extended shared memory isspace left in the difference management
area of the local storage system. already installed on the local storage system, a
new pair cannot be created because the number
of pairs that can be created on the system
exceeds the maximum.
WInstall the extended shared memory on the local
storage system, and then retry the operation.
The Create Pairs operation cannot be
performed because the extended shared
07829506505
memory is not installed on the local
storage system.
WIf the extended shared memory is not installed on
the remote storage system, install it, and then retry
The Create Pairs operation failed
because there is not enough space left
07829606505
the operation. If the extended shared memory isin the difference management area of
the Remote Storage System. already installed on the remote storage system,
a new pair cannot be created because the
number of pairs that can be created on the system
exceeds the maximum.
WInstall the extended shared memory in the Remote
Storage System, and then retry the operation.
The Create Pairs operation failed
because the extended shared memory
07829706505
is not installed in the Remote Storage
System.
WVerify the parameter of the specified Inflow
Control.
Failed to change the journal option
because the parameter of Inflow Control
is invalid.
07829906505
WVerify the parameter of the specified Data
Overflow Watch.
Failed to change the journal option
because the parameter of Data Overflow
Watch is invalid.
07830006505
Part code 06505 201