HP XP7 Remote Web Console Messages (H6F56-96010)

Table 62 Error codes (part code 07005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the target volume.This volume cannot be specified as an
P-VOL because it is used as a command
device.
00855207005
WOperations cannot be performed on unconfigured
volumes.
The S-VOL is not implemented.00855307005
WRestore the blocked volume, or select a volume
that is not a system disk, and then retry the
operation.
The command could not be executed
because the specified secondary volume
is blocked or used as a system disk.
00855407005
WWait until the volume is formatted, and then retry
the operation.
The secondary volume is being formatted
or shredded.
00855507005
WA volume that is not used as a command device
shall be specified as an S-VOL.
This volume cannot be specified as an
S-VOL because it is used as a command
device.
00855607005
WOperations cannot be performed on unconfigured
volumes.
The volume is not implemented.00855707005
WWait until the volume is formatted, and then retry
the operation.
The volume is being formatted.00855907005
WSpecify a volume that is not used as a command
device.
This volume cannot be specified because
it is used as a command device.
00856007005
EContact HP Technical Support.The command code is invalid.00856107005
EContact HP Technical Support.The command code sender is invalid.00856207005
WVerify the settings, and then retry the operation.The volume type is invalid.00856307005
WVerify the settings, and then retry the operation.The volume type is invalid.00856407005
EContact HP Technical Support.The command code sender is invalid.00856507005
EContact HP Technical Support.The number of effective lists is invalid.00856707005
WSpecify the volume of the supported emulation
type.
The emulation type is invalid.00856807005
WSee the Business Copy User Guide or the Fast
Snap User Guide for the relation between the
The command cannot be run because
the area of the differential table or the
pair table to set pairs is not enough.
00856907005
number of pairs that can be created and the
shared memory.
WRefresh the window, and then retry the operation.The selected volume does not exist.00857007005
WCheck the status of the volume.The volume is already defined as a
P-VOL.
00857207005
WRelease the Auto LUN setting.The volume is defined as a source
volume for Auto LUN.
00857307005
WRelease the Auto LUN setting.The volume is defined as a target volume
for Auto LUN.
00857407005
WSelect a different volume, and then retry the
operation.
The specified volume is for backup
servers only.
00858007005
WVerify the settings, and then retry the operation.The specified volume is not for backup
servers only.
00858107005
WWait for a while, and then retry the operation.The emulation type of the target volume
is being changed.
00858207005
210 Message (part code group 07nnn)