HP XP7 Remote Web Console Messages (H6F56-96010)

Table 64 Error codes (part code 07105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EContact HP Technical Support.There is sufficient shared memory to
create 4096 pairs, but initial storage
00854007105
system setup is required before creating
pairs.
iClose the message box.There is sufficient shared memory to
create 4096 pairs, and the initial
storage system setup is complete.
00854107105
EContact HP Technical Support.Failed to complete the initial shared
memory setup.
00854207105
EContact HP Technical Support.The shared memory size is different.00854307105
iVerify the settings, and then retry the operation.16 Mbytes of shared memory is
available.
00854407105
EContact HP Technical Support.A power supply failure is detected.00854507105
WRetry the operation with power ON.The command was rejected. The PS OFF
is in progress.
00854607105
EContact HP Technical Support.A data transfer failure is detected (CHA).00854707105
EContact HP Technical Support.A data transfer failure is detected (DKA).00854807105
WOperations cannot be performed on unconfigured
volumes.
Operations cannot be performed
because the primary volume is not
configured.
00854907105
WRestore the blocked volume, or select a different
volume, and then retry the operation.
The command could not be executed
because the specified primary volume is
blocked or used as a system disk.
00855007105
WWait until the volume is formatted, and then retry
the operation.
The primary volume is being formatted
or shredded.
00855107105
WAs the S-VOL, specify a volume that is not used
as a command device.
This volume cannot be specified as an
S-VOL(Primary Volume) because it is
used as a command device.
00855207105
WOperations cannot be performed on unconfigured
volumes.
Operations cannot be performed
because the secondary volume is not
configured.
00855307105
WRestore the blocked volume, or select a different
volume, and then retry the operation.
The command could not be executed
because the specified secondary volume
is blocked or used as a system disk.
00855407105
WWait until the volume is formatted, and then retry
the operation.
The secondary volume is being formatted
or shredded.
00855507105
WRelease the command device, and then retry the
operation.
This volume cannot be specified as an
T-VOL(Secondary Volume) because it is
used as a command device.
00855607105
WOperations cannot be performed on unconfigured
volumes.
The volume is not implemented.00855707105
WWait until the volume is formatted, and then retry
the operation.
The volume is being formatted.00855907105
WSpecify a volume that is not used as a command
device.
This volume cannot be specified because
it is used as a command device.
00856007105
EContact HP Technical Support.The command code is invalid.00856107105
230 Message (part code group 07nnn)