HP XP7 Remote Web Console Messages (H6F56-96010)

Table 64 Error codes (part code 07105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WThe requested operation cannot be performed in
the current pair status of Continuous Access
The T-VOL(Secondary Volume) is used
as a Remote Copy M-VOL.
00861407105
Synchronous Z. See the section "Sharing Business
Copy Z volumes" in the Business Copy for
Mainframe Systems User Guide for the relation
between Continuous Access Synchronous Z pair
status and Business Copy Z operations.
WThe R-VOL of Continuous Access Synchronous Z
pair cannot be used as T-VOL of Business Copy
Z. Specify another volume.
The T-VOL(Secondary Volume) is used
as a Remote Copy R-VOL.
00861507105
WPlease delete a Auto LUN pair.The T-VOL(Secondary Volume) is used
as a primary volume for Data Migration.
00861607105
WPlease delete a Auto LUN pair.The target T-VOL(Secondary Volume) is
used as a secondary volume for Data
Migration.
00861707105
WCheck the volume number.The T-VOL(Secondary Volume) is already
defined as an S-VOL(Primary Volume).
00861807105
WRelease the Auto LUN setting.The specified T-VOL(Secondary Volume)
is defined as a source volume for Auto
LUN.
00861907105
WVerify if the specified S-VOL(Primary Volume) and
T-VOL(Secondary Volume) are correct.
The command has been rejected,
because there is no pair to be operated.
00862407105
WCheck the specified volume number.The P-VOL(S-VOL) and S-VOL(T-VOL)
have the same number.
00862507105
WWait until the quick split operation is complete,
and then retry the operation.
The Simplex command could not be
executed because the quick split
operation was in progress.
00862607105
WWait until the status of the pair changes to Split.The Resync Pairs operation has been
rejected, because pair status is
SP-Pend/TRANS.
00862707105
EContact HP Technical Support.An internal logic contradiction occurred.00862807105
WVerify the settings, and then retry the operation.The status mode specification is invalid.00862907105
WVerify the settings, and then retry the operation.The status mode type is invalid.00863007105
WContact HP Technical Support.The specified CU number is invalid.00863107105
EContact HP Technical Support.The timing of issuing the command is
invalid.
00863207105
EContact HP Technical Support.The abnormal status is invalid.00863307105
WSpecify other volume(s), or release the Auto LUN
setting.
The specified S-VOL(Primary Volume) is
used as a source volume for Auto LUN.
00863707105
WThe specified operation cannot be performed. To
perform this operation, release the Cache
Residency Z setting, and then retry the operation.
The command has been rejected,
because the specified S-VOL(Primary
Volume) is set for use in Cache
Residency Z.
00863807105
WThe specified operation cannot be performed. To
perform this operation, release the Cache
Residency Z setting, and then retry the operation.
The command has been rejected,
because the specified T-VOL(Secondary
Volume) is set for use in Cache
Residency Z.
00863907105
Part code 07105 233