HP XP7 Remote Web Console Messages (H6F56-96010)

Table 68 Error codes (part code 08505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WVerify the status of the storage system. If this
problem persists, contact HP Technical Support.
Some of the shared memories of the
storage system may be blocked, or the
storage system is being maintained.
05831008505
WVerify the status of the storage system. If this
problem persists, contact HP Technical Support.
Some of the cache memories of the
storage system may be blocked, or the
storage system is being maintained.
05831108505
EWait until the write pending rate falls, and then
retry the operation.
The configuration cannot be changed
because the write pending rate of the
intended CLPR is too high.
05831208505
WCheck the Cache Residency size and the number
of Cache Residency areas.
The configuration cannot be changed
because the available Cache Residency
05831308505
size or the number of Cache Residency
areas in the intended CLPR is insufficient.
ERetry the operation after the maintenance job is
complete. If none of LDEV formatting, LDEV
A maintenance job is running in the
storage system (Correction Copy, Drive
05831508505
shredding or Extent shredding is running, contact
HP Technical Support.
Copy, LDEV formatting, LDEV shredding,
and Extent shredding).
EWait until the parity group migration is complete,
and then retry the operation.
Parity groups in CLPR are being
migrated in the storage system.
05831608505
EWait for a while, and then retry the operation.The CLPR capacity is being changed on
the storage system.
05831708505
EIf this problem persists, contact HP Technical
Support.
An error occurred on the DKC while
obtaining information about the progress
of CLPR processing.
05831808505
WSpecify the parity groups that contain all of the
journal volumes in the journal.
The CLPR to which the parity groups
belong cannot be changed, because the
05833908505
specified parity groups do not include
all of the journal volumes in a journal of
Continuous Access Journal and
Continuous Access Journal Z.
WWait until the configuration change performed
by RAID Manager or Auto LUN, or the Quick
The operation cannot be performed
because a configuration change is in
progress on the local storage system.
06574008505
Restore operation is complete, and then retry the
operation.
WRefresh the window, and then retry the operation.
If Cache Residency is set to the CLPR, release the
The cache capacity of the CLPR cannot
be reduced because the configuration
07501308505
setting, and then reduce the cache capacity of
the CLPR.
of the CLPR is already changed, or
Cache Residency is set to the CLPR.
WLog out, and then log back in with access to the
resource group containing the specified LDEV.
The specified LDEV belongs to a
resource group that you do not have
permission to access.
07501508505
WVerify the resources allocation for the user with
security administrator role.
The specified parity group or virtual
volume cannot be used because you do
07502608505
not have permission to access a resource
group to which the parity group or the
virtual volume belongs.
Part code 08505 247