HP XP7 Remote Web Console Messages (H6F56-96010)

Table 26 Error codes (part code 00622) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WSelect one or more table rows.[Delete] is clicked without selecting any
row.
10504200622
WCheck the settings.The setting cannot be changed, because
an invalid value has been input.
10508400622
WInstall a necessary program product. Otherwise,
execute the operation with the user ID who has
A necessary program product is not
installed, or insufficient permissions to
execute editorial operation.
10520400622
a permission to execute editorial operation, or
permit the user to enable the operation.
WCheck the settings.A radio button is not selected.10523400622
WSelect one or more table rows.The operation cannot be done because
no row is selected.
10523500622
WSet a target to be operate on the selected table,
then execute the operation.
The operation cannot be executed
because no target item is selected.
10523600622
WCreate an external path group.External path group creation has not
finished yet.
10523700622
WCheck the settings.Failed to allocate a Parity Group ID.10523800622
WCheck the number of selected alternate paths.The number of alternate paths that can
be set to an external volume exceeds the
maximum.
10523900622
WCheck the number of registered external path
groups.
Failed to allocate an External Path
Group ID.
10524000622
WSee the manual of the external device and check
the setting of the external volume.
An external volume that can be added
was not found by the result of
VolumeDiscovery.
10524100622
WResolve the cause of the error, or only select an
available external volume.
An external volume is selected, where
Volume Discovery executed ends with
an error.
10524200622
WCheck the settings.The emulation type that cannot coexist
is set.
10524300622
WCheck the contents of the path configuration.The specified external volume cannot be
set because the path configuration is
different.
10524400622
WCheck the settings.Failed to allocate a LDEV ID.10524500622
WCheck the settings.Failed to allocate a SSID.10524600622
WResolve the cause of the error, or only select an
available external volume.
The external volume is not supported.10525100622
WCheck the settings.Only one LDEV can be set because the
attribute of the specified external volume
is Remote Command Device.
10525500622
WCheck the settings.Only one LDEV can be set because the
specified external volume is in the data
transfer mode.
10525600622
WCheck the settings.LDEV Name cannot be set because the
value is out of range.
10525700622
WSelect one or more normal path, or restore the
path.
The path cannot be changed because
there will be no normal path for the
external volume.
10525800622
Part code 00622 55