HP XP7 Remote Web Console Messages (H6F56-96010)

Table 36 Error codes (part code 03005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WSpecify a pool volume, or specify a pool volume
that is set to the specified pool, and then retry the
operation.
The operation cannot be performed due
to one of the following reasons:
07826803005
• The specified volume is not a pool
volume.
• The specified pool volume is not set
to the specified pool.
WVerify the specified pool ID, and then retry the
operation.
The specified pool ID is invalid.07826903005
WVerify the tiering policy ID or the threshold value,
and then retry the operation.
The tiering policy ID or the threshold
value is invalid.
07828303005
WSelect a volume that satisfies the requirements for
the Pool-VOL.
The specified volume cannot be set as
a Pool-VOL because the volume capacity
07828403005
does not satisfy the requirements for the
Pool-VOL.
WAdd some pool volumes to have the configuration
comply with the tiering policy, or change the set
tiering policy.
The storage system configuration does
not comply with the tiering policy.
07828603005
WVerify the number of the specified tiering policies,
and then retry the operation.
The number of the specified tiering
policies is invalid.
07828703005
WSet the tiering policy without specifying the tiering
policy name.
The specified tiering policy name cannot
be set because the current microcode
version does not support this setting.
07828803005
WSee the troubleshooting section in the Fast Snap
User Guide and reserve the cache control device
The operation failed because the
required capacity of cache control
device cannot be allocated.
07829503005
required for the creation of Fast Snap pools. If
the required capacity of cache control device is
already reserved, contact HP Technical Support.
WDelete resources requiring cache management
(external volumes, virtual volumes, and P-VOLs of
A Fast Snap pool cannot be created
because there are not enough resources
07829603005
Fast Snap pairs) so that the total number ofdepending on cache management
devices. resources is less than or equal to 55,040, and
then retry the operation. If this problem persists,
contact HP Technical Support.
WRestore the blocked status of the pool volume with
a system area, and then retry the operation.
The operation cannot be performed
because the pool volume with a system
area is blocked.
07830503005
WCheck the status of the pool, and then retry the
operation.
The operation cannot be executed
because the specified pool has no
monitoring data.
10610503005
WCheck the configuration of tier in the pool.The operation cannot be executed
because there is only one tier in the
specified pool.
10610703005
EMount the encryption DKA.This function cannot be used because
the encryption function is not supported.
10710003005
EContact HP Technical Support to restore the
blocked status of the SAS controller, and then
retry the operation.
The specified operation cannot be
performed because the SAS controller
is blocked.
10710103005
WVerify the settings.The encryption environmental settings
are performed repeatedly.
10710203005
96 Message (part code group 03nnn)