Hitachi Dynamic Link Manager Software Users Guide for Solaris

Execution example after a path is added by the addition of an HBA port:
Check that a path for the same HBA port has been added:
36a41,44
> ### Device=ssd74 target=65664 lun=2
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9938,2
> ### Device=ssd84 target=134012 lun=2
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9939,2
52a61,64
> ### Device=ssd73 target=65664 lun=3
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9938,3
> ### Device=ssd83 target=134012 lun=3
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9939,3
Execution example after a path is added by the addition of a CHA port:
Check that a path for the same CHA port has been added:
26a31,32
> ### Device=ssd119 target=134012 lun=2
> ### Path=/pci@8,700000/SUNW,emlxs@1,1/fp@0,0/
ssd@w50060e80033a9939,2
28a35,36
> ### Device=ssd84 target=134012 lun=2
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9939,2
34a43,44
> ### Device=ssd118 target=134012 lun=3
> ### Path=/pci@8,700000/SUNW,emlxs@1,1/fp@0,0/
ssd@w50060e80033a9939,3
36a47,48
> ### Device=ssd83 target=134012 lun=3
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9939,3
16. To remove an LU from HDLM management, use a text editor to edit the
HDLM driver unconfiguration definition file (/opt/DynamicLinkManager/
config/dlmfdrv.unconf).
In the lines that define the LU that is to be removed from HDLM
management, delete the hash mark (#) in front of the LDEV property
line. Do not change anything else.
17. To remove an LU from HDLM management, apply the contents of the
HDLM driver unconfiguration definition file to the HDLM driver
configuration definition file.
4-40
HDLM Operation
Hitachi Dynamic Link Manager (for Solaris) User Guide