Hitachi Dynamic Link Manager Software Users Guide for Solaris

Item Description
OnlinePaths
Number of available paths in the displayed paths, indicated by a
decimal number. When the value of Paths equals the value of
OnlinePaths, all paths are online. If the value of OnlinePaths is
less than that of Paths, some paths might have an error status, in
which case you should check the status of individual paths and
take appropriate action for any paths that have an error status.
Example
The following shows the subsequent sub-parameters:
-srt cp
Sorts the CHA port information by the storage system model IDs
(Product), storage system serial numbers (S/N), and CHA port
numbers (ChaPort).
-t
Omits the title for each information item.
To display corresponding information about an HDLM device, sd or ssd device,
and LDEV
-drv
Displays the information about the PathID, the HDLM device, the sd or
ssd device for the HDLM device, and the LDEV (the LU in the storage
system).
For details on the contents of each display item, see Table 6-21 To
Display Corresponding Information About an HDLM Device, sd or ssd
Device, and LDEV on page 6-73.
The sub-parameters are as follows:
-pstv|-vstv
If the -pstv parameter is specified, information about the physical
storage system is displayed. If the -vstv parameter is specified,
information about the storage system recognized by the operating system
is displayed. If neither parameter is specified, information is displayed
according to the value specified in the -pstv parameter of set operations.
For information about the items that are displayed differently depending
on the specified -pstv and -vstv parameters, see
Table 6-10 Display
items for which the display results of the view operation differ depending
on the -pstv parameter specification on page 6-32 in Parameters on page
6-18.
6-72
Command Reference
Hitachi Dynamic Link Manager (for Solaris) User Guide