Hitachi Dynamic Link Manager Software Users Guide for Solaris

Message
ID
Message Text Explanation
KAPL10756
-E
The entered value is invalid. The
dlmsetboot utility processing will
now stop. Execute the utility again.
End time = aa...aa
Details
Processing will stop because an
incorrect value was entered three
or more times for the message
confirming execution of the
dlmsetboot utility.
aa...aa: year (4 digits)/month/
date hour:minute:second
Action
Re-execute the dlmsetboot
utility. For details on the
dlmsetboot utility, see The
dlmsetboot Utility for Assisting
Configuration of an HDLM Boot
Disk Environment on page 7-23.
KAPL10757
-E
Parameters are invalid. Execute the
dlmsetboot utility with valid
parameters. Usage: -d
<device_post_migration (cXtYdZ)>
Details
Invalid parameters have been
specified.
Action
Check the parameters of the
dlmsetboot utility, and then
retry. For details on the
dlmsetboot, see
The dlmsetboot
Utility for Assisting Configuration
of an HDLM Boot Disk
Environment on page 7-23.
KAPL10758
-E
You lack privileges for executing
the dlmsetboot utility.
Details
The dlmsetboot utility must be
executed by a user with root
permissions.
Action
Re-execute as a user with root
permissions. For details on the
dlmsetboot utility, see The
dlmsetboot Utility for Assisting
Configuration of an HDLM Boot
Disk Environment on page 7-23.
KAPL10759
-E
The specified post-migration boot
disk device is invalid. (aa...aa)
Details
The specified post-migration boot
disk device is invalid.
(aa...aa: Post-migration boot disk
device name (cXtYdZ))
Action
Specify a valid post-migration
boot disk device.
8-116
Messages
Hitachi Dynamic Link Manager (for Solaris) User Guide