Hitachi Global Link Manager Software Installation and Configuration Guide

• The host name must be no more than 32 bytes. You can use the following
characters:
A to Z a to z 0 to 9 -
Note that the host name cannot start or end with a hyphen (-).
If other Hitachi Command Suite products have already been installed on the
same machine, the services of these products are also started or stopped at
the same time when you start or stop Hitachi Command Suite Common
Component.
To change the host name of the management server:
1. Before changing the host name, write down the host name.
Execute the hostname command to check the host name (the
ipconfig /ALL command can also be used). The host name to be
specified in the settings file is case sensitive.
2. Execute the following command to stop Hitachi Command Suite Common
Component:
Hitachi-Command-Suite-Common-Component-installation-folder\bin
\hcmds64srv /stop
3. If SSL is used for communication between the management client and
management server, configure them again.
Use the new host name to reconfigure the SSL settings.
4. Edit the user_httpsd.conf file.
Change the value for the ServerName directive to the new host name.
The following shows the storage destination for the user_httpsd.conf
file:
Hitachi-Command-Suite-Common-Component-installation-folder\uCPSB
\httpsd\conf\user_httpsd.conf
If SSL is used for communication between the management client and
management server, change the following settings as well:
¢
If a host name has been specified for the <VirtualHost> tag, change
the host name to an asterisk (*).
¢
Change the value for the ServerName directive in the <VirtualHost>
tag to the new host name.
Note:
¢
Do not edit the httpsd.conf and user_hsso_httpsd.conf files.
5. In the cluster configuration, edit the cluster.conf file.
From among the virtual host name, host name for the primary node, and
host name for the secondary node, change the corresponding host name
to the new host name.
The following shows the storage destination for the cluster.conf file:
¢
Hitachi-Command-Suite-Common-Component-installation-folder\conf
\cluster.conf
3-44
Setting Up Global Link Manager
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)