Hitachi Global Link Manager Software Installation and Configuration Guide

Installing the Global Link Manager Agent in Solaris or HP-UX
Environments
By specifying options for the Global Link Manager agent installation
command, you can perform the following operations:
• Unattended installation
Installation is performed without the user needing to respond to prompts.
• Automatic properties file setup
By preparing an installation information settings file for Global Link
Manager agent that contains preset property values, you can set up the
properties files at the same time when the installation finishes. For details
about the properties files and the information settings file for Global Link
Manager agent installation, see
Changing Global Link Manager Agent
Environment Settings on page 7-10.
To install the Global Link Manager agent:
1. Login with root permissions.
2. Make sure that the prerequisite JRE (Java runtime environment) is
installed.
For details about the JRE version, see
When Using DMP on page 1-14, or
When Using HP-UX Multipathing on page 1-15.
3. Insert the Global Link Manager installation DVD-ROM.
In Solaris:
If the DVD-ROM is not mounted automatically, execute the following
command to mount it manually:
# mount -F hsfs -o ro DVD-ROM-drive-name DVD-ROM-mount-point
The following shows an example of executing the command:
# mkdir /cdrom/cdrom0
# mount -F hsfs -o ro /vol/dev/dsk/c0t6d0/GLMWIN_062000 /
cdrom/cdrom0
In HP-UX:
Execute the following command to check whether the Portable File
System daemon is running:
# /usr/bin/ps -ef | grep pfs
Check all running processes from a response similar to the following:
root 4159 4158 0 15:55:58 ttyp1 0:00 pfsd.rpc
root 4158 4149 0 15:55:58 ttyp1 0:00 pfsd
root 4150 4149 0 15:55:53 ttyp1 0:00 pfs_mountd
root 4151 4150 0 15:55:53 ttyp1 0:00 pfs_mountd.rpc
If the Portable File System daemon is not running, execute the
following command to run the daemon:
# pfs_mountd &
# pfsd &
Execute the following command to mount the DVD-ROM:
# pfs_mount /dev/dsk/c0t0d0 /cdrom/cdrom0
The following steps use an example where the DVD-ROM is mounted to
the /cdrom/cdrom0 directory.
Settings for Using DMP or HP-UX Multipathing
7-7
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)