Hitachi Global Link Manager Software Installation and Configuration Guide

Note that a space character cannot be used at the beginning or end of
a folder name.
¢
The path name must not contain any names reserved by the OS (CON,
AUX, NUL, PRN, CLOCK$, COM1 to COM9, and LPT1 to LPT9).
The following is the default database storage destination for the Hitachi
Command Suite products:
specified-installation-folder-for-Hitachi-Global-Link-Manager\databackup
5. Click the Next button.
The property files of Hitachi Global Link Manager and the Setup of the
data backup storage folder for path status log and property files
of Hitachi Global Link Manager dialog box appear. If you want to use a
folder different from the default, follow the rules below to specify the
folder:
¢
Absolute paths must be 140 bytes or less.
¢
Only the following characters can be used:
A to Z, a to z, 0 to 9, #, +, -, period (.), @, underscore (_), and the
space character.
Note that a space character cannot be used at the beginning or end of
a folder name.
¢
The path name must not contain any names reserved by the OS (CON,
AUX, NUL, PRN, CLOCK$, COM1 to COM9, and LPT1 to LPT9).
The following is the default storage destination for the property files of
Hitachi Global Link Manager and the path availability information:
specified-installation-folder-for-Hitachi-Global-Link-Manager\databackup
6. Click the Next button.
If Windows Firewall is installed, the Windows Firewall dialog box
appears. Check the settings in the dialog box, and then click the Next
button. Hitachi Command Suite Common Component and the port that
receives SNMP traps will be added to the Windows Firewall exceptions list.
Note: If you register Global Link Manager as an exception in the Windows
Firewall exceptions list, it might take approximately 15 minutes more to
install Global Link Manager. If you enabled Windows Firewall after
installing Global Link Manager, you must manually add Global Link
Manager to the exceptions list. For details on how to manually add Global
Link Manager to the exception list, see
Settings for Windows Firewalls on
page 3-54.
7. After installation, select whether to start the services of Hitachi Command
Suite products.
A dialog box appears, asking you whether you want to start the services
of Hitachi Command Suite products after installation. However, this dialog
box does not appear when Global Link Manager is installed on a standby
node in a cluster configuration. In this case, go to step 6.
¢
When installing Global Link Manager in a non-cluster configuration:
Select whether to start the services after installation (optional).
¢
When installing Global Link Manager in a cluster configuration
(executing node): Click the No button.
2-16
Installing Global Link Manager
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)