Hitachi Global Link Manager Software Installation and Configuration Guide

When you click the Yes or No button, the Confirmation Before
Installation dialog box appears.
8. Confirm that the displayed installation settings are correct, and then click
the Install button.
Installation starts. During the installation, dialog boxes indicating the
processing status appear. The Global Link Manager database is updated
by running an upgrade installation (except when the database files are
damaged). When the HGLM Settings Complete dialog box appears,
confirm the settings you specified during installation.
If a value specified for URL for the HGLM login window does not match
the information on the server on which Global Link Manager is installed,
see the appropriate reference below and change the value:
¢
For details on how to change the IP address, see
Changing the Global
Link Manager Login URL on page 3-50.
¢
For details on how to change the host name, see
Changing the Global
Link Manager Server Host Name on page 3-43.
¢
For details on how to change the port number of HBase 64 Storage
Mgmt Web Service, see
Changing Port Numbers for Accessing the
HBase 64 Storage Mgmt Web Service on page 3-47.
9. Click the Next button.
When installation has been completed normally, the Installation
Complete dialog box appears.
10. Click the Finish button to finish the installation.
The operating status of the Hitachi Command Suite Common Component
service varies depending on the setup status specified during installation.
When Global Link Manager is installed on a standby node in a cluster
configuration, the services will not start. Specify the settings for operating
Global Link Manager in a cluster configuration.
Note:
• The following settings are not retained after upgrade installations from v6
or v7. Configure these settings again after the upgrade installation.
- SSL settings
- JDK settings if you have performed a procedure to directly change the
JDK configuration file
• After an upgrade installation, the port for the Hitachi Command Suite
Common Component services changes to 22015. Accordingly, the port
number that is specified in the server access URL for Hitachi Global Link
also changes to 22015.
For details on how to change the URL, see
Changing the Global Link
Manager Login URL on page 3-50 after the upgrade installation.
• When you upgrade Hitachi Global Link Manager to v8, Hitachi Global Link
Manager and other Hitachi Command Suite products might not work
properly if Hitachi Command Suite v6 or v7 products exist on the same
machine and you start operating the updated Hitachi Global Link
Manager. Therefore, upgrade all Hitachi Command Suite products,
including Hitachi Link Manager, to v8 before you start operating them.
Installing Global Link Manager
2-17
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)