Hitachi Global Link Manager Software Messages

Message ID Message Text Description
cc...cc: Protocol 1. By using the host, port, and
protocol set in
"exauth.properties", check
whether the authentication server
can be accessed, the settings of
the external authentication server,
and the status of the network.
2. By using the hcmds64ldapuser
command, check that the
information for the server names
specified in the
"auth.server.name" attribute in
"exauth.properties" is
registered.
3. If StartTLS is used, check the SSL
settings.
4. If an OCSP is effective, check the
following:
- Make sure the certificate is valid.
5. If you cannot resolve the problem,
collect maintenance information,
and then contact the Support
Center.
For RADIUS:
1. By using the host, port, and
protocol set in
"exauth.properties", check
whether the authentication server
can be accessed, the settings of
the external authentication server,
and the status of the network. By
using the hcmds64radiussecret
command, check that the
information for the server names
specified in the
"auth.server.name" attribute in
"exauth.properties" is
registered.
2. If you cannot resolve the problem,
collect maintenance information,
and then contact the Support
Center.
KAPM02413-E The negotiation for a TLS
session has failed. (host =
aa...aa, port = bb...bb,
protocol = cc...cc)
aa...aa: Host
bb...bb: Port
cc...cc: Protocol
Negotiation for a TLS session has
failed.
Perform one of the following
procedures:
For LDAP:
1. Confirm whether the
authentication server can be
accessed by using the host, port,
and protocol set in
Messages with IDs Beginning with KAPM
5-49
Hitachi Global Link Manager Messages