Hitachi Global Link Manager Software Messages

Message ID Message Text Description
aa...aa: Server name Use the hcmds64ldapuser command
or the hcmds64radiussecret
command to reconfigure the
authentication information. If the
problem cannot be resolved, detailed
investigation is required to determine
the cause and resolve the problem.
Contact the Support Center, who may
ask you to collect troubleshooting
information.
KAPM15035-I Authentication information has
been acquired.
Authentication information has been
acquired.
KAPM15036-E Authentication information
cannot be acquired.
Authentication information cannot be
acquired.
Use the hcmds64ldapuser command
or the hcmds64radiussecret
command to reconfigure the
authentication information. If the
problem cannot be resolved, detailed
investigation is required to determine
the cause and resolve the problem.
Contact the Support Center, who may
ask you to collect troubleshooting
information.
KAPM15037-E Specify a value for at least one
key. (key = aa...aa)
aa...aa: Key
Specify a value for at least one key.
Specify key values, and then retry the
operation.
KAPM15039-I A connection was successfully
established. (server name =
aa...aa)
aa...aa: Server name
A connection was successfully
established.
KAPM15040-E A connection attempt has
failed. (server name = aa...aa)
aa...aa: Server name
A connection attempt has failed.
Make sure that the external
authentication server is running
correctly, and then perform one of the
following procedures:
For LDAP:
1. Make sure that the host or IP
address, port, and protocol
specified in exauth.properties
are correct.
2. Make sure that the network is
correctly connected.
3. Check the firewall settings.
4. Make sure that the LDAP directory
server is compatible with the
LDAPv3 protocol.
5. If StartTLS is used, check the SSL
settings. For StartTLS, specify the
host, not the IP address.
5-296
Messages with IDs Beginning with KAPM
Hitachi Global Link Manager Messages