Hitachi Global Link Manager Software Messages

Message ID Message Text Description
6. If an OCSP is enabled, check the
following:
- Make sure that the certificate is
valid.
7. If the problem cannot be resolved,
detailed investigation is required
to determine the cause and
resolve the problem. Contact the
Support Center, who may ask you
to collect troubleshooting
information.
For RADIUS:
1. Make sure that the host or IP
address, port, and protocol
specified in exauth.properties
are correct.
2. Check and then respecify the
client secret set for the external
authentication server and the
secret set for the client.
3. Make sure that the network is
correctly connected.
4. Check the firewall settings.
5. If the problem cannot be resolved,
detailed investigation is required
to determine the cause and
resolve the problem. Contact the
Support Center, who may ask you
to collect troubleshooting
information.
KAPM15041-E Authentication has failed.
(server name = aa...aa)
aa...aa: Server name
Authentication has failed.
See the KAPMxxxxx-E message of the
server aa...aa, above.
KAPM15042-E A syntax error occurred.
(server name = aa...aa)
aa...aa: Server name
A syntax error occurred.
See the KAPMxxxxx-E message of the
server aa...aa, above.
KAPM15043-E A check cannot be performed
because the external
authentication server type is
unknown.
A check cannot be performed because
the external authentication server type
is unknown.
If necessary, revise the value of
auth.server.type, and then retry the
operation.
KAPM15044-E A check cannot be performed
because the server
identification name is unknown.
A check cannot be performed because
the server identification name is
unknown.
If necessary, revise the value of
auth.server.name, and then retry the
operation.
KAPM15045-E A parameter has not been
specified. (key = aa...aa)
The value for a parameter has not
been specified.
Messages with IDs Beginning with KAPM
5-297
Hitachi Global Link Manager Messages